Engineering Graphics Essentials Fifth Edition

Engineering Graphics Essentials Fifth Edition
Author: Kirstie Plantenberg
Release: 2016-09
Editor: SDC Publications
Pages: 624
ISBN: 9781630570521
Language: en
Available for:

DESCRIPTION BOOK:

Engineering Graphics Essentials gives students a basic understanding of how to create and read engineering drawings by presenting principles in a logical and easy to understand manner. It covers the main topics of engineering graphics, including tolerancing and fasteners. This textbook also includes independent learning material containing supplemental content to further reinforce these principles. This textbook makes use of a large variety of exercise types that are designed to give students a superior understanding of engineering graphics and encourages greater interaction during lectures. The independent learning material allows students to explore the topics in the book on their own and at their own pace. The main content of the independent learning material contains pages that summarize the topics covered in the book. Each page has audio recordings that simulate a lecture environment. Interactive exercises are included and allow students to go through the instructor-led and in-class student exercises found in the book on their own. Also included are videos that walk students through examples and show them exactly how and why each step is performed.

Geometric and Engineering Drawing

Geometric and Engineering Drawing
Author: Ken Morling
Release: 2012
Editor: Routledge
Pages: 360
ISBN: 9780415536196
Language: en
Available for:

DESCRIPTION BOOK:

For all students and lecturers of basic engineering and technical drawing The new edition of this successful text describes all the geometric instructions and engineering drawing information, likely to be needed by anyone preparing or interpreting drawings or designs. There are also plenty of exercises to practise these principles.

Engineering Graphics

Engineering Graphics
Author: B Bhattacharyya
Release: 2008-11-21
Editor: I. K. International Pvt Ltd
Pages: 348
ISBN: 9788190746229
Language: en
Available for:

DESCRIPTION BOOK:

Hence it is essential for all engineers to achieve the capability of reading, preparing and interpreting drawings. The aim of the book is to provide a well-built foundation of engineering drawing to the beginners and to provide a scope to have a brushing up facility for the practicing engineers. Keeping these two basic objectives in view, a step-by-step approach has been adopted - starting from drawing instruments, sheets, scales, curves, etc. The guidelines as laid in different codes published by Bureau of Indian Standard are mentioned and followed. Involved association of the authors with the subject for a pretty long time in various capacities like teacher, examiner, paper-setter, and head-examiner has enriched the book in terms of content and its approach of dealing. Sufficient number of worked out examples and multiple choice questions are provided to have a holistic view of the subject.

Engineering Drawing And Graphics Autocad

Engineering Drawing And Graphics   Autocad
Author: K. Venugopal
Release: 2007
Editor: New Age International
Pages: 658
ISBN: 8122413129
Language: en
Available for:

DESCRIPTION BOOK:

This Book Provides A Systematic Account Of The Basic Principles Involved In Engineering Drawing. The Treatment Is Based On The First Angle Projection.Salient Features: * Nomography Explained In Detail. * 555 Self-Explanatory Solved University Problems. * Step-By-Step Procedures. * Side-By-Side Simplified Drawings. * Adopts B.I.S. And I.S.O. Standards. * 1200 Questions Included For Self Test.The Book Would Serve As An Excellent Text For B.E., B. Tech., B.Sc. (Ap. Science) Degree And Diploma Students Of Engineering. Amie Students Would Also Find It Extremely Useful.

Engineering Graphics With Solidworks 2010

Engineering Graphics With Solidworks 2010
Author: David C. Planchard,Marie P. Planchard
Release: 2010-02-22
Editor: SDC Publications
Pages: 468
ISBN: 9781585035670
Language: en
Available for:

DESCRIPTION BOOK:

Engineering Graphics with SolidWorks 2010 is written to assist a technical school, two year college, four year university instructor/student or industrial professional that is a beginner or intermediate SolidWorks user. The book combines the fundamentals of engineering graphics and dimensioning practices with a step-by-step project based approach to learning SolidWorks with an enclosed 1.5 hour multimedia CD. Learn by doing, not just reading! The book is divided into two parts: Engineering Graphics and SolidWorks 3D CAD Software. In chapter 1 through chapter 3, you explore the history of engineering graphics, manual sketching techniques, orthographic projection, isometric projection, multi-view drawings, dimensioning practices and the history of CAD leading to the development of SolidWorks. In chapter 4 through chapter 8, you apply engineering graphics fundamentals and learn the SolidWorks User Interface, Document and System properties, simple parts, simple and complex assemblies, design tables, configurations, multi-sheet, multi-view drawings, Bill of Materials, Revision tables, basic and advanced features. Follow the step-by-step instructions in over 70 activities to develop eight parts, four sub-assemblies, three drawings, and sex document properties. Formulate the skills to create and modify solid features to model a 3D FLASHLIGHT assembly. Chapter 9 provides a bonus section on the Certified SolidWorks Associate CSWA program with sample exam questions and initial and final SolidWorks Models. Passing the CSWA exam proves to employers that you have the necessary fundamental engineering graphics and SolidWorks competencies. Review individual features, commands, and tools for each project with the book's 1.5 hour multimedia CD and SolidWorks Help. The project exercises analyze and examine usage competencies based on the project objectives. The book is designed to compliment the SolidWorks Tutorials located in the SolidWorks Help menu. Each section explores the SolidWorks Online User's Guide to build you working knowledge of SolidWorks. Desired outcomes and usage competencies are listed for each project. Know you objectives up front. Follow the step-by-step procedures to achieve your design goals. work between multiple documents, features, commands, and properties that represent how engineers and designers utilize SolidWorks in industry. The authors developed the industry scenarios by combining their own industry experience with the knowledge of engineers, department managers, vendors, and manufacturers. These professionals are directly involved with SolidWorks every day. Their responsibilities go far beyond the creation of just a 3D model.

Engineering Graphics

Engineering Graphics
Author: Kaushik Kumar, Apurba Kumar Roy & Chikesh Ranjan
Release: 2022
Editor: S. Chand Publishing
Pages: 329
ISBN: 9789352718887
Language: en
Available for:

DESCRIPTION BOOK:

Engineering Graphics

ENGINEERING GRAPHICS

ENGINEERING GRAPHICS
Author: K. C. JOHN
Release: 2009-07-13
Editor: PHI Learning Pvt. Ltd.
Pages: 384
ISBN: 9788120337220
Language: en
Available for:

DESCRIPTION BOOK:

This book provides a detailed study of geometrical drawing through simple and well-explained worked-out examples and exercises. This book is designed for students of first year Engineering Diploma course, irrespective of their branches of study. The book is divided into seven modules. Module A covers the fundamentals of manual drafting, lettering, freehand sketching and dimensioning of views. Module B describes two-dimensional drawings like geometrical constructions, conics, miscellaneous curves and scales. Three-dimensional drawings, such as projections of points, lines, plane lamina, geometrical solids and their different sections are well-explained in Module C. Module D deals with intersection of surfaces and their developments. Drawing of pictorial views is illustrated in Module E, which includes isometric projection, oblique projection and perspective projections. The fundamentals of machine drawing are covered in Module F. Finally, in Module G, the book introduces computer-aided drafting (CAD) to make the readers familiar with the state-of-the-art techniques of drafting. KEY FEATURES : Follows the International Standard Organization (ISO) code of practice for drawing. Includes a large number of dimensioned illustrations, worked-out examples, and Polytechnic questions and answers to explain the geometrical drawing process. Contains chapter-end exercises to help students develop their drawing skills.

ENGINEERING GRAPHICS WITH AUTOCAD

ENGINEERING GRAPHICS WITH AUTOCAD
Author: D. M. KULKARNI,A. P. RASTOGI,A. K. SARKAR
Release: 2009-04-13
Editor: PHI Learning Pvt. Ltd.
Pages: 352
ISBN: 9788120337831
Language: en
Available for:

DESCRIPTION BOOK:

Designed as a text for the undergraduate students of all branches of engineering, this compendium gives an opportunity to learn and apply the popular drafting software AutoCAD in designing projects. The textbook is organized in three comprehensive parts. Part I (AutoCAD) deals with the basic commands of AutoCAD, a popular drafting software used by engineers and architects. Part II (Projection Techniques) contains various projection techniques used in engineering for technical drawings. These techniques have been explained with a number of line diagrams to make them simple to the students. Part III (Descriptive Geometry), mainly deals with 3-D objects that require imagination. The accompanying CD contains the animations using creative multimedia and PowerPoint presentations for all chapters. In a nutshell, this textbook will help students maintain their cutting edge in the professional job market. KEY FEATURES : Explains fundamentals of imagination skill in generic and basic forms to crystallize concepts. Includes chapters on aspects of technical drawing and AutoCAD as a tool. Treats problems in the third angle as well as first angle methods of projection in line with the revised code of Indian Standard Code of Practice for General Drawing.

Introductory Engineering Graphics

Introductory Engineering Graphics
Author: Edward E. Osakue
Release: 2018-08-31
Editor: Momentum Press
Pages: 218
ISBN: 9781947083615
Language: en
Available for:

DESCRIPTION BOOK:

Introductory Engineering Graphics concentrates on the main concepts and principles of technical graphics. The chapters and topics are organized in a sequence that makes learning a gradual transition from one level to another. However, each chapter is presented in a self-contained manner and may be studied separately. Chapter 1 discusses guidelines for drafting and Chapter 2 presents the principles and techniques for creating standard multiview drawings. Chapter 3 discusses auxiliary view creation, whereas Chapter 4 focuses on section view creation. Basic dimensioning is covered in Chapter 5. Isometric pictorials are presented in Chapter 6. Working drawings are covered in Chapter 7 and the Appendices provide introductory discussions about screw fasteners, general and geometric tolerancing, and surface quality and symbols. The book is designed as a material for instruction and study for students and instructors of engineering, engineering technology, and design technology. It should be useful to technical consultants, design project managers, CDD managers, design supervisors, design engineers, and everyone interested in learning the fundamentals of design drafting. The book is in accord with current standards of American National Standards Institute/American Society for Mechanical Engineers (ANSI/ASME). Its principal goal is meeting the needs of first- and second-year students in engineering, engineering technology, design technology, and related disciplines.

Engineering Graphics with SOLIDWORKS 2019

Engineering Graphics with SOLIDWORKS 2019
Author: David Planchard
Release: 2019-01-03
Editor: SDC Publications
Pages: 576
ISBN: 9781630572303
Language: en
Available for:

DESCRIPTION BOOK:

Engineering Graphics with SOLIDWORKS 2019 is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The book combines the fundamentals of engineering graphics and dimensioning practices with a step-by-step project based approach to learning SOLIDWORKS. The book is divided into four sections with 11 Chapters. Chapters 1 - 3: Explore the history of engineering graphics, manual sketching techniques, orthographic projection, Third vs. First angle projection, multi-view drawings, dimensioning practices (ASME Y14.5-2009 standard), line type, fit type, tolerance, fasteners in general, general thread notes and the history of CAD leading to the development of SOLIDWORKS. Chapters 4 - 9: Comprehend the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple machine parts, simple and complex assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Follow the step-by-step instructions in over 80 activities to develop eight parts, four sub-assemblies, three drawings and six document templates. Chapter 10: Prepare for the Certified SOLIDWORKS Associate (CSWA) exam. Understand the curriculum and categories of the CSWA exam and the required model knowledge needed to successfully take the exam. Chapter 11: Provide a basic understanding between Additive vs. Subtractive manufacturing. Discuss Fused Filament Fabrication (FFF), STereoLithography (SLA), and Selective Laser Sintering (SLS) printer technology. Select suitable filament material. Comprehend 3D printer terminology. Knowledge of preparing, saving, and printing a model on a Fused Filament Fabrication 3D printer. Information on the Certified SOLIDWORKS Additive Manufacturing (CSWA-AM) exam. Review individual features, commands, and tools using SOLIDWORKS Help. The chapter exercises analyze and examine usage competencies based on the chapter objectives. The book is designed to complement the SOLIDWORKS Tutorials located in the SOLIDWORKS Help menu. Desired outcomes and usage competencies are listed for each project. Know your objectives up front. Follow the step-by step procedures to achieve your design goals. Work between multiple documents, features, commands, and properties that represent how engineers and designers utilize SOLIDWORKS in industry. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors and manufacturers.

Engineering Graphics Essentials with AutoCAD 2014 Instruction

Engineering Graphics Essentials with AutoCAD 2014 Instruction
Author: Kirstie Plantenberg
Release: 2013-06-10
Editor: SDC Publications
Pages: 798
ISBN: 9781585038114
Language: en
Available for:

DESCRIPTION BOOK:

Engineering Graphics Essentials with AutoCAD 2014 Instruction gives students a basic understanding of how to create and read engineering drawings by presenting principles in a logical and easy to understand manner. It covers the main topics of engineering graphics, including tolerancing and fasteners while also teaching them the fundamentals of AutoCAD 2014. This book features an independent learning disc containing supplemental content to further reinforce these principles. Through its many different exercises this text is designed to encourage students to interact with the instructor during lectures, and it will give students a superior understanding of engineering graphics and AutoCAD. The enclosed independent learning disc allows the learner to go through the topics of the book independently. The main content of the disc contains pages that summarize the topics covered in the book. Each page has voice over content that simulates a lecture environment. There are also interactive examples that allow the learner to go through the instructor led and in-class student exercises found in the book on their own. Video examples are also included to supplement the learning process.

Principle of Engineering Graphics And Drawing

Principle of Engineering Graphics And Drawing
Author: R.K.Dhawan
Release: 2010
Editor: S. Chand Publishing
Pages: 422
ISBN: 9788121935180
Language: en
Available for:

DESCRIPTION BOOK:

In First Angle Projection . For the students of B.E./B.Tech of Maharshi Dayanand University (MDU),Rohtak and Kurushetra University, Kurushetra.

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics
Author: Randy Shih
Release: 2015
Editor: SDC Publications
Pages: 680
ISBN: 9781585039326
Language: en
Available for:

DESCRIPTION BOOK:

SOLIDWORKS 2015 and Engineering Graphics: An Integrated Approach combines an introduction to SOLIDWORKS 2015 with a comprehensive coverage of engineering graphics principles. Not only will this unified approach give your course a smoother flow, your students will also save money on their textbooks. What’s more, the exercises in this book cover the performance tasks that are included on the Certified SOLIDWORKS Associate (CSWA) Examination. Reference guides located at the front of the book and in each chapter show where these performance tasks are covered. The primary goal of SOLIDWORKS 2015 and Engineering Graphics: An Integrated Approach is to introduce the aspects of Engineering Graphics with the use of modern Computer Aided Design package – SOLIDWORKS 2015. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphics language used in all branches of technical industry. This book does not attempt to cover all of SOLIDWORKS 2015’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

SOLIDWORKS 2017 and Engineering Graphics

SOLIDWORKS 2017 and Engineering Graphics
Author: Randy Shih
Release: 2017-03
Editor: SDC Publications
Pages: 720
ISBN: 9781630570736
Language: en
Available for:

DESCRIPTION BOOK:

SOLIDWORKS 2017 and Engineering Graphics: An Integrated Approach combines an introduction to SOLIDWORKS 2017 with a comprehensive coverage of engineering graphics principles. Not only will this unified approach give your course a smoother flow, your students will also save money on their textbooks. What’s more, the exercises in this book cover the performance tasks that are included on the Certified SOLIDWORKS Associate (CSWA) Examination. Reference guides located at the front of the book and in each chapter show where these performance tasks are covered. The primary goal of SOLIDWORKS 2017 and Engineering Graphics: An Integrated Approach is to introduce the aspects of Engineering Graphics with the use of modern Computer Aided Design package – SOLIDWORKS 2017. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of sixteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphics language used in all branches of technical industry. This book does not attempt to cover all of SOLIDWORKS 2017’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Autodesk Inventor 2018 and Engineering Graphics

Autodesk Inventor 2018 and Engineering Graphics
Author: Randy Shih
Release: 2018-01-26
Editor: SDC Publications
Pages: 704
ISBN: 9781630571139
Language: en
Available for:

DESCRIPTION BOOK:

Autodesk Inventor 2018 and Engineering Graphics: An Integrated Approach will teach you the principles of engineering graphics while instructing you on how to use the powerful 3D modeling capabilities of Autodesk Inventor 2018. Using step by step tutorials, this text will teach you how to create and read engineering drawings while becoming proficient at using the most common features of Autodesk Inventor. By the end of the book you will be fully prepared to take and pass the Autodesk Inventor Certified User Exam. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of Autodesk Inventor 2018’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Autodesk Inventor 2016 and Engineering Graphics

Autodesk Inventor 2016 and Engineering Graphics
Author: Randy Shih
Release: 2015-06-16
Editor: SDC Publications
Pages: 700
ISBN: 9781585039746
Language: en
Available for:

DESCRIPTION BOOK:

Autodesk Inventor 2016 and Engineering Graphics: An Integrated Approach will teach you the principles of engineering graphics while instructing you on how to use the powerful 3D modeling capabilities of Autodesk Inventor 2016. Using step by step tutorials, this text will teach you how to create and read engineering drawings while becoming proficient at using the most common features of Autodesk Inventor. By the end you will be fully prepared to take and pass the Autodesk Inventor Certified User Exam. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of Autodesk Inventor 2016’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Autodesk Inventor 2015 and Engineering Graphics

Autodesk Inventor 2015 and Engineering Graphics
Author: Randy Shih
Release: 2014-06-25
Editor: SDC Publications
Pages: 704
ISBN: 9781585038879
Language: en
Available for:

DESCRIPTION BOOK:

Autodesk Inventor 2015 and Engineering Graphics: An Integrated Approach will teach you the principles of engineering graphics while instructing you on how to use the powerful 3D modeling capabilities of Autodesk Inventor 2015. Using step by step tutorials, this text will teach you how to create and read engineering drawings while becoming proficient at using the most common features of Autodesk Inventor. By the end you will be fully prepared to take and pass the Autodesk Inventor Certified User Exam. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of Autodesk Inventor 2015’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Autodesk Inventor 2022 and Engineering Graphics

Autodesk Inventor 2022 and Engineering Graphics
Author: Randy Shih
Release: 2021-06
Editor: SDC Publications
Pages: 680
ISBN: 9781630574352
Language: en
Available for:

DESCRIPTION BOOK:

• Teaches you the principles of both engineering graphics and Autodesk Inventor 2022 • Uses step by step tutorials that cover the most common features of Autodesk Inventor • Includes a chapter on stress analysis • Prepares you for the Autodesk Inventor Certified User Exam Autodesk Inventor 2022 and Engineering Graphics: An Integrated Approach will teach you the principles of engineering graphics while instructing you on how to use the powerful 3D modeling capabilities of Autodesk Inventor 2022. Using step-by-step tutorials, this text will teach you how to create and read engineering drawings while becoming proficient at using the most common features of Autodesk Inventor. By the end of the book you will be fully prepared to take and pass the Autodesk Inventor Certified User Exam. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of Autodesk Inventor 2022’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Guide for Effective Engineering Graphics Waterways Experiment Station

Guide for Effective Engineering Graphics  Waterways Experiment Station
Author: Waterways Experiment Station (U.S.)
Release: 1977
Editor: Unknown
Pages: 170
ISBN: UOM:39015086527598
Language: en
Available for:

DESCRIPTION BOOK:

SolidWorks 2014 and Engineering Graphics An Integrated Approach

SolidWorks 2014 and Engineering Graphics   An Integrated Approach
Author: Randy Shih
Release: 2013-12-19
Editor: SDC Publications
Pages: 604
ISBN: 9781585038602
Language: en
Available for:

DESCRIPTION BOOK:

SolidWorks 2014 and Engineering Graphics: An Integrated Approach combines an introduction to SolidWorks 2014 with a comprehensive coverage of engineering graphics principles. Not only will this unified approach give your course a smoother flow, your students will also save money on their textbooks. What’s more, the exercises in this book cover the performance tasks that are included on the Certified SolidWorks Associate (CSWA) Examination. Reference guides located at the front of the book and in each chapter show where these performance tasks are covered. The primary goal of SolidWorks 2014 and Engineering Graphics: An Integrated Approach is to introduce the aspects of Engineering Graphics with the use of modern Computer Aided Design package – SolidWorks 2014. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of SolidWorks 2014’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.